Table 2.11 Mmb Cli Commands (User) - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
Command
Partition connection
console
DR-related
MMB configuration and other
set active_mmb
show active_mmb
help
System configuration
set mmb control reset
set mmb control switch_over
add user
show user_list
Command
Power control
power off
power on
Partition creation
add partition
remove partition
show partition configuration
set reserved_sb
show reserved_sb
set partition home
show partition home
set partition dynamic_reconfiguration
show partition dynamic_reconfiguration
set memory_operation_mode
show memory_operation_mode
set memory_mirror_ras_mode
show memory_mirror_ras_mode
set pci_address_mode
show pci_address_mode
set lan_device_mode
show lan_device_mode
set pci_express_mode
show pci_express_mode
set partition name
show partition name
hotadd partition
hotremove partition
Partition control
sadump
Administrator
Permitted
Permitted

TABLE 2.11 MMB CLI commands (User)

Administrator
Permitted
Permitted
Permitted
Text Console connection to partition
- DR related commands
- Sets the active MMB.
- Displays the active MMB.
Help information
- Resets the MMB.
- Switch Over the MMB.
- Adds User.
- Displays Users.
- Turns the power off.
- Turns the power on.
- Adds a partition component.
- Removes a partition component.
- Displays the partition configuration.
- Sets the Reserved SB.
- Displays the Reserved SB.
- Sets the Home SB.
- Displays the Home SB.
- Sets DR state of partition.
- Displays DR state of partition.
- Sets Memory operation mode.
Displays Memory operation mode.
- Sets Memory operation at Mode.
Displays Memory operation at Mode.
- Sets PCI bus number allocation mod.
- Displays PCI bus number allocation mod.
- Sets LAN device mode.
Displays LAN device mode.
- Sets PCI-express mode.
- Displays PCI-express mode.
- Sets the partition name.
- Displays the partition name.
- Dynamic Reconfiguration HotAdd
- Dynamic Reconfiguration HotRemove
- sadump instruction
Outline
Outline