Show Partition Home; Show Partition Lan_Device_Mode - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
Failed to execute show partition dynamic_reconfiguration command.
DR can't be enabled, because of no DR license

2.3.7 show partition home

Displays Home SB of the specified partition.

Privilege: Aｌｌ
(1) Input format
show partition home <partition#>
(2) Option
None
(3) Usage example
When Home SB of partition 3 is displayed
#show partition home 3
SB#2
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified partition number is invalid.
The specified parameter is invalid.
Unable to execute this command on a standby MMB.
Home SB is not set in Partition#x.
Failed to execute show partition home command.
Partition#x is not defined.

2.3.8 show partition lan_device_mode

Displays the setting (enable/disable) of LAN Device/WOL in IOU unit of the specified partition.

Privilege: Aｌｌ
(1) Input format
show partition lan_devoce_mode <partition#>
(2) Option
None
(3) Usage example

Example: When LAN Device Mode of IOU (In example it is IOU#2 or IOU#3) from Partition#3 is
displayed
#show partition lan_device_mode 3
iou#2: LAN Device: enable WOL: enable