Table 3.22 Display Contents Of Operation Help Display - Fujitsu PRIMEQUEST 2000 Series Tool Reference

UEFI Menu Operations
Slot#11 OpROM
Commit Changes and
Exit
Discard Changes and
Exit
Remaks:
Slot counting may differ depending on the type of IOUs in the system (IOU_1GbE: 4 PCI slots, IOU_10GbE:
3 PCI slots).
(3) Operation help display
The help for the operations mentioned on this page is shown in "".
 =Move Highlight
<Enter>=Select Entry
Esc=Exit
3.4.4.2 [I/O Space Assignment Configuration] Menu
I/O space assignment of various I/O devices in the system can be configured in [I/O Space Assignment
Configuration] menu.
After resetting the system, UEFI assigns the I/O space to the I/O device for which [Auto] or [Force] are set in
this menu.
The number of devices in which the I/O space can be allocated is limited, and there is a device to which the
I/O space is not allocated either. To allocate the I/O space, as follows is surely done.
■ [Force] is set to the device that wants to allocate the I/O space.
■ After resetting the system for which I/O space is assigned in this menu, open this menu once again and
confirm that the I/O space is assigned for the relevant system.
The settings changed in this menu are enabled after the system is reset.
Following is the display of window immediately after start-up of [I/O Space Assignment Configuration] Menu.
 Enabled
 Disabled
By default, it is Disabled.
Enables/disables Legacy OpROM of the PCI
card which is mounted.
 Enabled
 Disabled
By default, it is Disabled.
The contents having changes in the settings
are saved and exit from this menu.
The contents having changes in the settings
are cancelled and exit from this menu.

TABLE 3.22 Display contents of operation help display

Items
Moves the cursor up and down.
Selects the items.
Returns to
the setting changes of this menu.
Setting for PCI Express slot
#11 of PCI_Box#3
Description
"3.1 Front page of Boot Manager" without saving