Fujitsu PRIMEQUEST 2000 Series Tool Reference page 211

MMB Web-UI (Web User Interface) Operations
2. Configure the filter in the [Add Filter] window. Then, click the [Apply] button.
This adds the new filter.
Editing a filter
-
1. Click the radio button of a filter in the [Select] column so that you can edit the filter. Then, click
the [Edit Filter] button.
The [Edit Filter] window appears.
2. Specify the save path.
Edit the filter in the [Edit Filter] window. Then, click the [Apply] button.
- Deleting a filter
1. Click the radio button of a filter in the [Select] column so that you can delete the filter. Then, click
the [Remove Filter] button.
A deletion confirmation dialog box appears.
2. Click the [OK] button.
This deletes the filter. The browser returns to the [Access Control] window.
[Message]
The following table lists the messages displayed in this window.
Message Number
I_00013 Setting completed.
E_00412 You need an empty entry.
W_00413 Nothing is selected.
For details on the messages displayed on the window, see
(C122-E178EN).
[Add Filter]/[Edit Filter] window
Click the [Add Filter] button or [Edit Filter] button in the [Access Control] window to display the [Add Filter]
window or [Edit Filter] window, respectively.
Although the [Add Filter] window and [Edit Filter] window have different window titles, their setting items are
the same. This section describes these items in the [Add Filter] window.
Message
PRIMEQUEST 2000 Series Message Reference