Table 6.9 Displayed Contents Of Menu Selection Area; Table 6.10 Displayed Contents Of The Help Display Area For Operation - Fujitsu PRIMEQUEST 2000 Series Tool Reference

Setting of sadump environment
TABLE 6.9
Item
Exit
ACPI name of disk/disk
partition
Remarks
-Regarding to ACPI name which is used for disk or disk partition,
-To use devices of ETERNUS as dump device, setting up UEFI deriver is needed beforehand. Refer
"PRIMEQUEST 2000 Series SAN Boot Environment Configuration Manual (C122-E206EN)" for details.

TABLE 6.10 Displayed contents of the help display area for operation

Item
↑↓=Move Highlight
<Enter>= Select Entry
Note
[Esc] key is displayed on the screen but don't operate it.
- A dump device is initialized when it is created. It takes a time to initialize, depends on the size of selected
disk or disk partition. In some cases it takes more than several minutes until going to the next screen.
Displayed contents of menu selection area
Description
Exits this menu
Select disk or disk partition to create dump device
Description
Moves the cursor up or down
Create dump device with selected disk or disk
partition, and go to dump device create menu.
If [Exit] is selected, go to dump device create menu
without creating dump device.
refer"5.7 Device Path".