Power Off - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
sadump
reset
nmi
Partition connection
console
DR-related
MMB configuration and other
set active_mmb
show active_mmb
help
System configuration
set mmb control reset
set mmb control switch_over
add user
show user_list

2.6.2 power off

Turn off the power of entire system.
When the entire system is already in power off state, any process will not be executed for entire system.

Privilege: Administrator, Operator
(1) Input format
power off {force}
(2) Option
force: Shows that the power of the system turns off forcefully without shutting down the operating system of
system.
(3) Usage example
None
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified parameter is invalid.
Unable to power off the system.
Unable to force power off on the system.
Command Failed. Code=0x%04X, 0x%02X
Unable to execute this command because the system is under maintenance.
Unable to power off the System because you have not authority to operate this system.
System Configuration Failed.
Command Administrator
- sadump instruction
- Hard Reset instruction
- NMI interrupt instruction
- Text Console connection to partition
- DR related commands
- Sets the active MMB.
- Displays the active MMB.
Permitted Help information
- Resets the MMB.
- Switch Over the MMB.
- Adds User.
- Displays Users.
Outline