MMB Web-UI (Web User Interface) Operations
1.2.10 [Power Supply] window
[Power Supply] window displays the PSU status in the PRIMEQUEST 2000 series.
Once the error in the status of each PSU is detected, the abnormality status is maintained till the PSU is
replaced or the abnormality status is cleared by clicking the [Status Clear] button.
Items
System Power Status
Power Supply
Redundancy
PSU Status
PSU Power Status
FIGURE 1.14 [Power Supply] Window
TABLE 1.38 Display Item on [Power Supply] Window
Displays the power supply status of PRIMEQUEST 2000 series system (chassis)
·
On
·
Standby
Displays redundancy status of PSU/FANU.
·
Redundant: In case of the PSU is redundant.
·
Non-redundant: Sufficient Resources: When there is a PSU which is
required to operate the system even if redundancy of the PSU is lost.
·
Non-redundant: Insufficient Resources: When redundancy of the PSU is
lost, and when there is no PSU which is required for operating the system.
Displays the status of PSU/FANU
·
OK
·
Not-present
·
Failed
·
A/C Lost
·
Configuration error
·
- (When Type is FANU)
Displays power supply ON/OFF status of PSU/FANU
Description