Security Configuration] Menu; Figure 3.28 Display Example Of [Security Configuration] Menu; Table 3.39 Display Contents Of Menu Selection - Fujitsu PRIMEQUEST 2000 Series Tool Reference
Hide thumbs
Also See for PRIMEQUEST 2000 Series:
- Tool reference (734 pages) ,
- Administration manual (467 pages) ,
- Message reference (232 pages)
Table of Contents
Advertisement
UEFI Menu Operations
3.4.8 [Security Configuration] menu
In [Security Configuration] menu, settings related to TPM are performed.
Remarks
The TPM chip is not mounted, [Security Configuration] menu is not displayed.
The following figure shows the window display example of [Security Configuration] menu.
FIGURE 3.28 Display Example of [Security Configuration] Menu
(1) Page information display
Displayed as [Security Configuration] menu.
(2) Menu selection
Selection menu is shown in the
Item
TPM Support
TPM State
"TABLE 3.39 Display Contents of Menu
TABLE 3.39 Display Contents of Menu Selection
Sets whether TPM is supported in BIOS.
Disabled
Enabled
Default setting is Disabled.
Performs the settings for status of TPM chip.
・Disabled
・Enabled
Default setting is Disabled.
Remarks
Displayed when "Enabled" is selected in "TPM Support".
Sets the value of "TPM Enabled Status" and "TPM Active Status" as per the
set value of "TPM Status", as mentioned below.
When "Enabled" is selected
TPM Enabled Status ⇒ Enabled
Selection".
Display contents
Advertisement
Table of Contents
