Clear Access_Control - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
(3) Usage example

Example: In PRIMEQUEST 2800E, when SB#3 is to be added in Partition #2
#add partition 2 SB 3
Are you sure to continue adding SB#3 to Partition#2? [Y/N] Y
Adding SB#3 to Partition#2 has been completed successfully.
#

Example: In PRIMEQUEST 2800E, when IOU#1 is to be added in Partition #2
#add partition 2 IOU 1
Are you sure to continue adding IOU#1 to Partition#2? [Y/N] Y
Adding IOU#1 to Partition#2 has been completed successfully.
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
Are you sure you want to add %s to partition #%d? [Y/N]:
Adding %s to Partition#%d has been completed successfully.
The specified partition number is invalid.
The specified [SB|IOU] number is invalid.
Parameter missing
The specified parameter is invalid.
The parameter [IOU] is not supported.
Unable to add the specified SB#x to the partition due to CPU mismatch between SBs.
Unable to add the specified [SB#x | IOU#x] to the partition because the specified [SB#x | IOU#x] status is
failed.
Unable to execute this command on a standby MMB.
Failed to execute add partition command.
Failed to execute %s command.
Unable to add the specified SB to the partition due to CPU composition abnormal.
Unable to add the specified SB to the partition due to DIMM composition abnormal.
Unable to add the specified SB to the partition due to SB composition abnormal.
Unable to add the specified SB to the partition due to DIMM does not satisfy requirements of Mode.
Unable to change partition configuration because this partition is powered on.
The specified command is not supported.(error=[%s])
Unable to execute this command because the system is under maintenance.
Unable to execute this command because the Partition#x is under maintenance.
Unable to set configuration because the power on/off is processing.
Please execute it after a while again.
The specified [SB#x|IOU#x] is Not-present.
The specified [SB#x | IOU#x] is not free.

2.2.2 clear access_control

It clears the setting of Access Control.

Privilege: Administrator
(1) Input format
clear access_control
(2) Option
None