Appendix A List of Setting Items
A.1.30
Setting Items of [Alarm E-Mail] Window
The following table lists the initial value and the value that can be set for the setting items of [Alarm E-Mail]
Window.
Setting Item
Alarm E-Mail
From
To
SMTP Server
Subject
A.1.31
Setting Items of [Alarm E-Mail Filtering Condition] Window
The following table lists the initial value and the value that can be set for the setting items of [Alarm E-Mail
Filtering Condition] Window.
TABLE A.31 Setting Items of [Alarm E-Mail Filtering Condition] Window
Setting item
Severity
Partition
Unit
Source
A.2
Setting Items on UEFI
This list shows the initial value and the values that can be set for Setting Items on UEFI
Setting Items on A.2.1 [I/O Space Assignment Configuration] window
Setting Items on A.2.2 [LAN Remote Boot Configuration] window
Setting Items on A.2.3 [CPU Configuration] window
Setting Items on A.2.4 [PCI Bus Padding Configuration] window
Setting Items on A.2.5 [PCI Subsystem Configuration] window
TABLE A.30 Setting Items of [Alarm E-Mail] Window
Initial value
Disable
None
None
None
None
Initial value
All ON
All ON
All
All
Values that can be set
Enable
Disable
E-Mail Address
E-Mail Address
IP address or FQDN1 of
SMTP server
[0-9],[a-z],[A-Z], Special
characters: !,#,",$,%,&,',(),*,+,-
,.,/,_,~
space
Values that can be set
Error
Warning
Info
(Multiple selection is possible)
Select the partition
(Multiple selection is possible)
All
Specified
All
Specified
Remarks
When [Use envelope
"from" address] check box
is checked, the address of
[From:] is set as the source
E-Mail address and the
mail are sent. By default
the checkbox is off.
When multiple addresses
are specified, they are
separated by using ","
(Comma).
Remarks
When specified is selected,
the unit to be displayed is
set ON.
When specified is selected,
the source to be displayed
is set ON.