Table 2.20 Displayed And Setting Items In The [Power Control] Window - Fujitsu PRIMEQUEST 500A Series Installation Manual

CHAPTER 2 Setup

Table 2.20 Displayed and setting items in the [Power Control] window

Item
Power
Control
2-46
Select a power control setting to be displayed for the partition.
The [Power On] menu item is not displayed for a powered-on partition.
Conversely, the [Power Off], [Power Cycle], [Reset], [INIT], and [Force
Power Off] menu items are not displayed for a powered-off partition.
• Power On: Powers on the partition.
• Power Off: Powers off the partition.
• Power Cycle: Forcibly powers off the partition and powers it on again.
• Reset: Resets the partition.
• INIT: Generates an INIT interrupt for the partition and produces a Dump.
• Force Power Off: Forcibly powers off the partition.
• Not specified: Takes no action for the partition.
Note:
• To forcibly terminate applications running in the partition, execute
INIT. Before executing INIT, stop important applications. Also,
unmount unnecessary file systems.
Description
C122-E001-10EN