Fujitsu PRIMEQUEST 2000 Series Tool Reference page 402

UEFI Menu Operations
Connection Retry
Count
Connection
Establishing Timeout
ISDI
Enable DHCP
Initiation IP Address
(*1)
Initiator Subnet Mask
(*1)
Gateway (*1)
Get Target info via
DHCP (*1)
Target Name
Target IP Address
Sets number of retries.
・0~16
By default, it is 0
Sets time out value. Unit is millisecond
By default, it is 1000.
6 digits of ISID (ID used when initiator establishes session with target)
are required for input.
Default setting is generated by MAC address.
Remarks
 When the characters entered are insufficient, a pop-up window
showing the message, "Please enter enough characters Press ENTER
to continue" appears.
 If more than 7 digits are entered in ISDI, a pop-up window showing the
message, "Error! Input is incorrect, please input 6 hex numbers!"
appears.
If 6 digits contain the value other than the hexadecimal number, that
number should be entered as 0.
(Example)ABCXYZ→ABC000
Enables/disables DHCP with space key.
When [Internet Protocol] is set to [Autoconfigure], this item is not
displayed.
・[ ]: Disabled
・[X]: Enabled
By default, it is Disabled.
Sets IP Address of iSCSI Initiator side.
This item is displayed when [Internet Protocol] is set to [IP4] or [IP6] and
enabled DHCP.
Sets subnet mask of iSCSI Initiator side.
This item is displayed when [Internet Protocol] is set to [IP4] or [IP6] and
enabled DHCP.
Sets IP address of gateway.
This item is displayed when [Internet Protocol] is set to [IP4] or [IP6] and
enabled DHCP.
Sets the function to get the IP address, port of iSCSI Target from DHCP
server with space key.
This item is displayed when [Internet Protocol] is set to [IP4] or [IP6] and
enabled DHCP.
・[ ]: Disabled
・[X]: Enabled
By default, it is disabled.
Enters the IQN name of target.
Number of characters that can be entered are 4~223 characters.
This item is displayed when [Internet Protocol] is set to [IP4] or [IP6] and
disabled [Get Target info via DHCP].
Remarks
When character string not related to the IQN name is entered, pop-up
window of [Invalid iSCSI Name!] is displayed.
When number of entered character is not enough, pop-up window of
[Please enter enough characters Press ENTER to continue] is displayed.
Types of characters that can be entered are given below.
0-9,A-Z,a-z,!"#$%&'()*+,-./:;<=>?@[ ¥]ˆ_'{|}
Sets IP Address of target.
This item is displayed when [Internet Protocol] is set to [IP4] or [IP6] and
disabled [Get Target info via DHCP].
By default, it is 0.0.0.0