Fujitsu PRIMEQUEST 2000 Series Tool Reference page 381

UEFI Menu Operations
Enhanced Speed Step
Turbo Mode
Energy Performance
P-State Coordination
CPU C3 Report
CPU C6 Report
CPU C7 report
Package C State limit
QPI Link Frequency
Select
Sets the Power Saving function of CPU to enable or disable.
 Enabled
 Disabled
Default setting is, Enabled.
Remarks
Displays only when [Custom] is selected in [Power Technology].
Sets the Intel (R) Turbo Boost Technology function to enable or
disable.
 Enabled
 Disabled
Default setting is, Enabled.
Remarks
Displays only when [Custom] is selected in [Power Technology].
Selects the Energy Performance mode.
 Performance
 Balanced Performance
 Balanced Energy
 Energy Efficient
Default setting is, Performance.
Remarks
Displays only when [Custom] is selected in [Power Technology].
Sets the coordination method of P-State of CPU.
 HW_ALL
 SW_ALL
 SW_ANY
Default setting is, HW_ALL.
Remarks
Displays only when [Custom] is selected in [Power Technology].
Sets the CPU C3 Report function to enable or disable.
 Enabled
 Disabled
Default setting is, Disabled.
Remarks
Displays only when [Custom] is selected in [Power Technology].
Sets the CPU C6 Report function to enable or disable.
 Enabled
 Disabled
Default setting is, Enabled.
Remarks
Displays only when [Custom] is selected in [Power Technology].
Sets the CPU C7 Report function to enable or disable.
 Enabled
 Disabled
Default setting is, Enabled.
Remarks
Displays only when [Custom] is selected in [Power Technology].
Sets the function by which the transition of C-state of CPU is
limited.
 C0: Allows transition till C0 state
 C2: Allows transition till C2 state
 C6: Allows transition till C6 state
 C7: Allows transition till C7 state
 No Limit: There is no limit for the transition of C state
Default setting is, No Limit.
Set the QPI Link Frequency.
 Auto
 8.0GT/s
 7.2GT/s
 6.4GT/s
Default setting is, Aluto.