Fujitsu PRIMEQUEST 2000 Series Tool Reference page 4

Preface
Edition Date Revised location (type) (*1)
2.3.31 help
3.4 [Device Manager] Menu
3.4.4 [PCI Subsystem Configuration] Menu
3.4.5* [PCI Bus Padding Configuration] Menu - This chapter is deleted.
3.4.7*
3.5.4 [Boot From DVD/CD] Menu
3.5.4* [Set Time out Value] Menu
5.1.1.2 Description
A.2 Setting Items on UEF
1.2.7 [System Setup] Window
1.2.8 [System Power Control] window
1.2.18 [MMB] Menu
1.3.1 [Power Control] Window
1.3.4 [Partition Configuration] Menu
1.3.5 [Reserved SB Configuration] window
1.3.7 [Partition#x] Menu
2.2.1 add partition
2.2.4 console
2.2.6 power off
2.2.7 power on
Description
- Console is added to Operator and the CE
authority.
- "I/O Space Assignment Configuration" and
"PCI Bus Padding Configuration"
integrated into the menu under the control of
"PCI Subsystem Configuration".
- TABLE 3.10 Displayed contents of menu
selection
(The description of Driver Health menu is
added.)
FIGURE 3.17* Display Example on [PCI
Subsystem Configuration] Menuis replaced.
- It moves to the subordinate of "PCI
Subsystem Configuration" as "OpROM Scan
Configuration Menu" bringing "IOU OpROM
Scan Configuration Menu"
PCI_Box OpROM Scan Configuration menu"
together.
- The chapter of "Boot From DVD/CD Menu"
is added.
- [Set Time out Value] is changed to [Set
Boot Delay Time].
- FIGURE 3.73* Display Example of [Set
Time out Value] Menu is replaced.
TABLE 3.70 Display Content of Menu
Selection Help Display
- [Auto Boot Time-out] is changed to [Boot
Delay Time].
- The explanation is added.
- It changes additionally to the UEFI menu
composition.
Message change
are
and "3.4.8