Boot From Dvd/Cd] Menu; Set Boot Delay Time] Menu; Figure 3.70 [Boot From Dvd/Cd] Message - Fujitsu PRIMEQUEST 2000 Series Tool Reference

UEFI Menu Operations
4. Press [] key or [] key and select Operating System Loader File to be booted.
5. Press [Enter] key.
File is loading and Operating System is activated.

3.5.4 [Boot From DVD/CD] Menu

When this menu is selected, it operates as follows.

It starts from the medium inserted in DVD/CD Drive connected with the system. At this time, it does not
start from Hard Disk Drive and Net Drive connected with the system.

This menu is for the start of the medium for maintenance.

When DVD/CD Drive is not connected or the medium has not been inserted, the following messages
are displayed.
It is started from the medium of DVD/CD Drive again by connecting DVD/CD Drive while displaying the
above-mentioned message, inserting the medium, and inputting the key.

3.5.5 [Set Boot Delay Time] Menu

[Set Boot Delay Time] Menu sets the standby time from the completion time of UEFI diagnosed process till
the Operating System process transfer time, in seconds. Default setting is 10 Seconds. The time set in this
menu is the standby time of key input. In the standby time of key input, as shown in
Window]", the Logo Window appears. Except [Enter] key, if other key is input during the standby time of key
input, then it transited to Boot Manager Front Page. Moreover, if [Enter] key is input, it immediately transit to
Operating System activation process.

FIGURE 3.70 [Boot From DVD/CD] Message

"FIGURE 3.71 Logo