Figure 6.14 [Confirmation] Menu; Table 6.17 Displayed Contents Of Menu Selection Area; Table 6.18 Displayed Contents Of The Help Display Area For Operation - Fujitsu PRIMEQUEST 2000 Series Tool Reference

Setting of sadump environment

TABLE 6.17 Displayed contents of menu selection area

Item
Go to create dump device
Exit
ACPI name of dump
device
Remarks
. Regarding to ACPI name which is used for disk or disk partition, refer "5.7 Device Path".

TABLE 6.18 Displayed contents of the help display area for operation

Item
↑↓=Move Highlight
<spacebar>= Toggle
checkbox
Note
[Esc] key is displayed on screen but don't operate it.
[Confirmation] Menu
This is displayed when the [Go to create dump device] is selected in the [Select multiple devices] menu
Confirm multiple disks selected for dump devices.
Description
Go to [Confirmation] menu.
Exits this menu without actually creating any dump
device.
ACPI name of the dump device disk is displayed.
Select a dump device by [Space] key, then [] on the
right-hand of the entry is changed to [X].
Description
Move the cursor up or down.
Select a disk.
Selected disk is marked with [X]. Operating [Space]
key once more, the selection is canceled.

FIGURE 6.14 [Confirmation] Menu