Power On; Reset - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations

2.6.3 power on

Turn on the power supply of the entire system.
When the power supply for the entire system is already turned on, processing for such system is not done.

Privilege: Administrator, Operator
(1) Input format
power on
(2) Option
None
(3) Usage example
None
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified parameter is invalid.
Unable to power on the partition#%d due to CPU mismatch between SBs.
Unable to power on the partition#%d due to DIMM does not satisfy requirements of Mode.
Unable to power on due to mismatch between supply voltage and input voltage.
Unable to power on the partition#%d due to abnormal DIMM composition.
Unable to power on the partition#%d due to abnormal SB composition.
Unable to power on the system.
Command Failed. Code=0x%04X, 0x%02X
Unable to execute this command because the system is under maintenance.
The Power On failed, because of switching the Home SB.
Please execute it after a while again.
Unable to power on the system because you have not authority to operate this system.
System Configuration Failed.

2.6.4 reset

Specify the Hard Reset to the system.
When the entire system is not in Power On state, any kind of processing for such system is not done.

Privilege: Administrator, Operator
(1) Input format
reset {quiet}
(2) Option
quiet: The command is executed without interactive operation with the user.
(3) Usage example
Example: When reset is directed by the Administrator authority.
Administrator> reset
Are you sure you want to Reset? [Y/N]: Y