Fujitsu PRIMEQUEST 2000 Series Tool Reference page 3

Preface
Revision History
Edition Date
01 2014-2-18
02 2014-4-10
Revised location (type) (*1)
-
The entire manual
1.2.11 [Fan] windows
1.2.13 [SB]menu
1.2.15 [DU] Menu
1.3.1 [Power Control] Window
1.3.4 [Partition Configuration] Menu
1.3.6 [Power Management Setup] Window
1.3.7 [Partition#x] Menu
[ASR Control] Window
1.3.7 [Partition#x] Menu
[Information] Window
1.5.3 [Management LAN Port Configuration]
window
1.7.7 [Power Control] Window
2.2.4 console
2.2.14 set partition dynamic_reconfiguration
2.2.30 set partition pci_address_mode
2.2.37 hotremove partition
Description
-
Dynamic Partitioning
-> Dynamic Reconfiguration
DP -> DR
- Warning is added to Stataus.
- Description change of Core/Max Core
- Bad Block and Shielded are added to Status
of Physical Drive.
- FBU item deletion
- Bad Block and Shielded are added to Status
of Physical Drive.
- The operation at kdump by Linux OS is
added.
- Stop Error is deleted from System Progress
of Power Control. The effect that System
Progress does not become Panic in Windows
is added.
- FIGURE 1.47 [Add SB/IOU to Partition]
Window is replaced.
- The View Configuration button is deleted.
- An unnecessary Item [Power save Grace
Period] description is deleted.
- The description of [Cancel Boot Watchdog] is
deleted.
- Description change of Core/Max Core
- 1G/Full of User Port is deleted.
- Stop Error is deleted from System Progress
of Power Control. The effect that System
Progress does not become Panic in Windows
is added.
- Execution authority change (CE and
Operator addition)
- The execution privilege is changed only to
Administrator.
- An unnecessary explanation when the power
supply is On is deleted.
- The description mistake of Usage example is
corrected. (pc->pci)
- The example of IOU is corrected.