Appendix A List of Setting Items
Setting
items
A.1.15
Setting Items of [Mode] Window
The following table lists the initial value and the value that can be set for the setting items of [Mode] Window.
Setting items
Memory
Operation
Mode (setting)
Memory Mirror
RAS Mode
(setting)
PCI Address
Mode (setting)
Dynamic
Reconfiguration
(setting)
On board LAN
Mode
(setting)
A.1.16
Setting Items of [Add User]/ [Edit User] Window
The following table lists the initial value and the value that can be set for the setting items of [Add User]/ [Edit
User] Window.
Setting
items
User Name
None
Password
None
Privilege
In case of Add User:
Admin
In case of Edit User:
current privilege
Status
In case of Add User:
Initial value
TABLE A.15 Setting Items of [Mode] Window
Initial value
Normal Mode
Mirror Keep Mode
PCI Segment Mode
Disable
Enabled(WOL disabled)
TABLE A.16 Setting Items of [Add User]/ [Edit User] Window
Initial value
Value that can be set
Value that can be set
Performance Mode
Normal Mode
Partial Mode
Full Mode
Sapre Mode
Mirror Keep Mode
Capacity Keep
Mode
PCI Bus Mode
PCI Segment Mode
Enable
Disable
・Enabled(WOL enabled)
・Enabled(WOL disabled)
・Disabled
Value that can be set
Minimum 8 and Maximum
32 characters can be
entered.
[0-9], [a-z], [A-Z], "-", "_".
However, the first character
must be [a-z] [A-Z].
More than 8 characters and
less than 32 characters.
[0-9], [a-z], [A-Z]
Special characters: ! # $ %&
'( ) = ‐ ^ ~ ¥ @ `[ ] { } : * ;
+ ? < . > , / _ |
Admin
Operator
User
CE
Partition Operator
Enabled
Remarks
[Enable] on [Console
Redirection Setup] Window.
Remarks
Remarks