Figure 1.63 [Ipv4 Interface] Window (Primequest 2400E/2800E) (2); Table 1.89 Setting And Display Items In The [Ipv4 Interface] Window (Primequest 2400E/2800E) - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations

FIGURE 1.63 [IPv4 Interface] window (PRIMEQUEST 2400E/2800E) (2)

TABLE 1.89 Setting and display items in the [IPv4 Interface] window (PRIMEQUEST 2400E/2800E)

Items
MMB Virtual/Physical IP Address
Virtual IP Address
Hostname
IP Address
Subnet Mask
Gateway address
MMB#0 IP Address
Sets the virtual IPv4 IP address for Web-UI access.
If the MMB has a redundant configuration, the switched MMB will take over this
virtual IP address.
Sets the host name in FQDN format.
You can enter the following characters:
[a-z], [A-Z], [0-9], - (hyphen), . (period).
Only the above characters can be specified.
Also, the following restrictions apply:

The character string must begin with an alphabetic character.

The character string cannot begin or end with the following character specified:
-
(hyphen) or . (period).
The default is "PRIMEQUEST" + Product Serial Number.
For example, if the serial number is 1020516004, the character string is
"PRIMEQUEST1020516004".
Remarks
The setting in FQDN format is not required if you are not operating on the domain.
Sets the IP address.
Sets the subnet mask.
Sets the gateway IP address.
Sets the physical IP address assigned to the MMB#0 interface.
Description