Fujitsu PRIMEQUEST 2000 Series Tool Reference page 130

MMB Web-UI (Web User Interface) Operations
Items
Power Control
Force Power Off Delay
Boot Selector

EFI: The UEFI menu screen is displayed.

Boot: Operating system is being booted.

Operating system Running: Operating system running state

Operating system Shutdown: Operating system shutting down.

Panic: Panic (Only in RHEL)

Power Off In Progress: Partition power off is in process.

Fatal: Stopped.

Dumping: The dumping is being output.

Halt: Halting.

)
Remarks

When SVAS (Server View Agentless Service) is not installed to partition,
the display is not switched over in 'Operating system Running' even if
Operating system is working.
Moreover, for 'Operating system shutdown', 'Panic' commanded by
SVAS if SVAS is not installed, there is no display.
SVAS : Specifies the piece of software running on the OS in managed
nodes to help BMC with management. Unless SVAgent, it does not
provide management interface to the outside.

The operation at kdump by Linux OS is as follows.
RHEL : It changes to "Panic" and "Dumping". (Only when "FJSVfefpcl"
package is installed.)
SUSE : It does not change "Panic" and "Dumping".

When REMCS Option is installed on Partition of RHEL, "Panic" is
displayed. It is not displayed in Windows.
Selects power control specified for the partition.
However, for the partition which is already in power-on state, [Power On] is not
displayed. On the contrary, for the partition which is already in powered off,
[Power Off], [Reset], [NMI], [Power Cycle], [Force Power Off] and [sadump] are
not displayed.

Power On: Partition is the powered on.

Power Off: Partition is powered off.
From the view point of Operating system, it is same as that the power
button of the device is on. Therefore, when the operating system
supports the ACPI, power can be turned off after the operating system is
shutdown. For details, see Power Specifications (ACPI) of the operating
system. When the operating system does not support the ACPI, the
power can be turned off without shutting down the operating system.

Power Cycle: Powered on again after the partition is forcibly powered on.

Reset: Resets the partition.

NMI: Produces the NMI interruption for the partition.

Force Power Off: Turns off the power forcefully.

sadump: Specifies the SADUMP for the partition.

(Not specified): There is no instruction for this partition.
Specifies whether to enforce power off, when power off is done without proper
operation of the shutdown instruction for the operating system by [Power Off]
on the partition. In case enforced power off has been specified, the specified
time (1~9 minutes) can be set. The partition is forcibly powered off when the
specified time has lapsed.
The default setting of check box is Off.
Specifies the boot device for which the Boot Manager setting of BIOS is
Override temporarily. Select the device to be boot from pull-down menu.

No Override: Boots by the EFI Boot Manager settings.
Description