Set Hostname; Set Http - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB CLI (Command Line Interface) Operations
The specified gateway address is invalid
The specified IP address is duplicated.
The specified IP address is loopback address.

2.2.17 set hostname

Specifies the host name of MMB in FQDN format
Characters which can be entered, are as follows.
[a-z],[A-Z],[0-9],[-] (Hyphen),[.] (Dot)
However, following conditions must be observed

The first character must be alphanumeric character.

[-] (Hyphen),[.] (Dot) cannot be used as first character
Default value is "PRIMEQUEST" + Product Serial Number.
Example:
When serial number is 1020516004,
"PRIMEQUEST1020516004"

Privilege: Administrator
(1) Input format
set hostname <hostname>.<domain name>
(2) Option
None
(3) Usage example
# set hostname hogehoge.fujitsu.com
#
(4) Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified hostname is invalid.
Unable to execute this command on a standby MMB.

2.2.18 set http

Enable/disable of HTTP server is set
Default value is disable (http is invalid)

Privilege: Administrator
(1) Input format
set http [enable|disable]