MMB CLI (Command Line Interface) Operations
iou#3:LAN Device: disable WOL: disable
#
(4)
Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified partition number is invalid.
The specified parameter is invalid.
Unable to execute this command on a standby MMB.
Failed to execute %s command.
Failed to execute show partition command.
2.3.9 show partition name
Displays the name of the specified partition.
Privilege: All
(1)
Input format
show partition name <partition#>
(2)
Option
None
(3)
Usage example
When name of the partition 3 is displayed
#show partition name 3
hogehoge
#
(4)
Message
The following table lists the messages which are displayed in this CLI.
For details of the messages, see the PRIMEQUEST 2000 Series Message Reference (C122-E178EN).
The specified partition number is invalid.
The specified parameter is invalid.
Unable to execute this command on a standby MMB.
Failed to show partition name command.
2.3.10 show partition memory_mirror_ras_mode
Displays Memory Mirror RAS Mode of the specified partition.
mirror_keep: Sets the Mirror Keep Mode.
capacity_keep: Sets the Capacity Keep mode.
Privilege: All
(1)
Input format