Shift And Select Lever Shaft Assembly - Chery QQ Service Manual

Chery QQ Service Manual
1- Shift and select lever shaft
4- Select lever shaft
7- Shift cam spring
10- Return spring
13- Return spring
1.Use the professional tools to remove the 4 pin, 3 E- snap ring and component
from the select lever shaft.
2. Clear up all the parts, if necessary, please replace the used parts.
3. Install according to the reverse process.
Notice:
When hammering the slotted spring pin, use the wood block to support to
prevent bending the shift and select lever shaft.
When installing reverse, 5th interlock roller, first enlace the cam
spring, secondly hammer the slotted spring pin.
Keep the identical directions of the select lever shaft, reverse, 5th shift cam
and spring.
1st, 2nd shift fork shaft assembly and 3rd, 4th Shift fork shaft assembly.
Fig.3-44 Shift and select lever shaft assembly
5- Slotted spring pin
8- Shift cam
11- Interlock 12- Slotted spring pin
14-E- snap ring
Chery Automobile Co., Ltd
2- Gasket 3- Slotted spring pin
-74-
Transmission System
6- Spring
9- Slotted spring pin
return
F