4. Disassembly and adjustment of the
engine hood assy.
Preparation of tool(s): 13# wrench
4.1. Take off four adjusting bolts from engine
hood. And remove the engine hood.
At the same time, unscrew four adjusting bolts
to adjust the front/rear position and right/left
position of the engine hood.
4.2. Installation of engine hood assy.:
The installing steps are reverse to those for
removal.
Installation torque is 30±1Nm
5. Disassembly and assembly of air
intake grille assy.
Preparation of tool(s): cross screwdriver, socket
wrench
5.1. Removal Step
5.1.1. Open the engine hood by hand.
5.1.2. Use a cross screwdriver to remove the fix
screw from the intake grille.
5.1.3. Utilize a socket wrench to remove the
fixing bolts from the intake grille.
5.1.4. Detach the intake grille.
5.2. Installation Step
The installing steps are reverse to those for
removal.
Installation torque is 5±1Nm
9