Chery Tiggo 2009 Service Manual page 793

10.
CHECK CAMSHAFT
• Check the following:
− There should be no accumulation of debris on the signal plate of camshaft rear end.
− There should be no chip on the signal plate of camshaft rear end.
Is the check result normal?
Yes >>
Go to the next step.
No >>
Remove debris and clean the signal plate of camshaft rear end or replace camshaft.
11.
CHECK DTC
• With the X-431 scan tool, read ECM DTCs.
• Refer to DTC Confirmation Procedure .
Is DTC 23 still present?
Yes >>
Replace the ECM.
No >>
The system is now operating properly.
Reassemble the vehicle and road test to verify the customers complaint is repaired.
Chery Automobile Co., Ltd.
DIAGNOSIS & TESTING
03
509
03–