Print On The Océ Tds400 Printer; The Printer Operator Panel; The Keys - Oce TDS400 Quick Reference Manual

Print on the Océ TDS400 printer
Before you can print, the service technician must install and set the Océ
TDS400 printer according to the connectivity manual. Print the files from your
application through a driver or through programs like Océ Print Exec
Workgroup (optional).
The Océ TDS400 holds the following protocols with TCP/IP:
Line Printer Daemon (LPD)
■
File Transfer Protocol (FTP)
■
Server message blocks (SMB)
■
See the user manual how to use these protocols.

The printer operator panel

Operate the printer through the printer operator panel. The printer operator
panel has a display and six keys as shown on the back flap.

The keys

The red 'stop' key
▼
Stop a print job
Press the red 'stop' key on the printing operator panel.
1
The current print job stops.
You can stop the print jobs with Océ Queue Manager (See the user
Note:
manual).
The green 'on-line' key
the printer. See the user manual for all the settings.
▼
Set the printer off-line
Press the green 'on-line' key.
1
The upper line on the display reads 'off-line'. The printer is in 'off-line' mode.
The 'on-line' light is off.
14 Océ TDS400 Quick Reference Manual
enables you to cancel a print or copy job.
The 'on-line' key lets you enter the settings mode of