Access The System; Enter Or Quit The Key Operator System - Oce VarioPrint 2045-65 DC Configuration And Maintenance Manual

Access the system

Enter or quit the key operator system

Introduction
The key operator system contains the settings to change, or restore, the default
configuration of the Océ VarioPrint 2045-65 DC.
You can enter the key operator system if the Océ VarioPrint 2045-65 DC is not
processing a job. A PIN is required to make the settings available. Only Océ
Service can change the key operator PIN.
The changes, made in the key operator system, are applied after you have left
the key operator system.
Before you begin
Make sure that the Océ VarioPrint 2045-65 DC does not process a job.
1
Illustration
[4] Enter the key operator system using a PIN
[4] Enter the key operator system using a PIN
[5] Quit the key operator system
[5] Quit the key operator system
Introduction 19