Table of Contents
Advertisement
User setting
5.3.2
02 Scan Initial setting
Besides the factory default setting (Full Auto), you may set the scanning condition as the initial setting as
desired.
To specify the scanning conditions set here to be used as the initial setting when the Reset function is used,
select [User Setting \ 01 System Setting \ 04 Reset Setting \ 02 Mode Reset Setting], and then select [Initial]
for the Reset button function.
1
Follow the procedure on page 5-3 to display the User Setting Menu Screen.
2
Touch [02 Initial Setting], and then [02 Scan Initial setting].
3
Set the following setting items in initial conditions: Original Setting, Color, Zoom, Color Space, Image
Adjust., Scan Size, Resolution, and Default Server.
–
Follow the same procedure as setting it on the Copy Screen. Touch [ADF] to select the ADF mode
as the initial setting.
4
Touch [OK] to complete the setting.
–
To cancel the change, touch [Cancel].
In either case, the System Setting Menu Screen will be restored.
5
If further changes are required, touch the desired key.
CS655 Pro
5
5-27
Advertisement
Table of Contents
