Shock Absorber Inspection And Disassembly; Cushion Lever/Rod Inspection And Disassembly - Suzuki Katana 1100 Service Manual

CHASSIS 7-44
• Remove the shock absorber by removing its lower end bolt
and nut.
\.
• Remove the cushion lever/rod out of the swingarm by
removing the bolt and nut.
• Separate the cushion rod and cushion lever by removing the
bolt and nut.
.
..
INSPECTION AND DISASSEMBLY
SHOCK ABSORBER
Inspect the shock absorber body and hose joints for damage
and oil leakage. If any defects are found, replace the shock
absorber assembly with new one.
~
..
~t
..4
CUSHION LEVER/ROD
Inspect the respective cushion lever and rod bearings by hand
while they are in the cushion lever and rod. Rotate each bearing
spacer to inspect for abnormal noise and smooth rotation.
Replace the bearing if there is anything unusual. Inspect the
dust seals. If they are found to be damaged, replace them with
new ones.