ENGINE
3-16
• Flatten the lock portion of the oil seal retainer and remove
it by removing the four bolts.
• Remove the neutral position indicator switch by removing
the screws.
NOTE:
Do not lose the O-ring
(1),
switch contact
®
and its spring
0·
• Remove the countershaft bearing retainer by removing the
two screws.
• Remove the plug
(1)
on the upper crankcase.
• Remove the upper crankcase securing bolts and nut.
09911-73730: 5
mm
"T" type hexagon wrench
• Remove the oil pan by removing the bolts.
09911-73730: 5
mm
"T"
type hexagon wrench