ENGINE
3-18
• Remove the crankshaft assembly from the upper crankcase.
• Pull out the two dampers
CD
and cam chain guide (]).
• Remove the O-rings.
®
and
0.
NOTE:
Bear in mind that the crankshaft thrust bearings
©
are located
between shaft and case.
• Remove the countershaft assembly
®
and driveshaft assem
bly@.
NOTE:
Do not lose the C-rings ([) and bearing pins
0.
• Hold the gearshift forks by hand to draw out the gearshift
fork shaft from the lower crankcase.