Suzuki Katana 1100 Service Manual page 82

ENGINE 3-52
• Install the gearshift shaft with the center of the gear on shaft
side aligned the center of gearshift cam driven gear.
• Install the washer
CD
and fix the gearshift shaft with the clip
@.
• Install the washer
CD,
pin
@,
oil pump driven gear
®
and
washer (1).
• Fix the oil pump driven gear with the circlip.
09900-06107: Snap ring pliers
• Install the thrust washer
CD
onto the countershaft.
NOTE:
Flat surface of washer is positioned outside.
• Install the genrator/oil pump drive gears onto the primary
driven gear.