ENGINE
3-14
• Remove the thrust washer
CD.
• With the spacer removed, the primary driven gear (integral
with the clutch housing) is free to disengage from the primary
drive gear.
• Remove the primary driven gear assembly with the genera
tor/oil pump drive gears.
• Remove the thrust washer
0.
• Remove the clip and washer from the gearshift shaft.
• Draw out the gearshift shaft
CD,
and then remove the cam
driven gear
0
by removing the screws
0.
09900-09003: Impact driver set
NOTE:
When removing the cam driven gear, do not lose gear shifting
pawl
CD,
pin
®
and spring
0).