Suzuki Katana 1100 Service Manual page 92

ENGINE 3-62
• Each camshaft journal holder is identified with a cast-on
letter. Install the dowel pins to each camshaft journal holder.
• Secure the ten camshaft journal holders evenly by tightening
the camshaft journal holder bolts sequentially. Try to equal­
ize the pressure by moving the wrench diagonally from one
bolt to another and from one camshaft journal holder to
another, to push shafts down evenly.
NOTE:
Damage to head or camshaft journal holder thrust surfaces
may result if the camshaft journal holders are not drawn down
evenly.
• Tighten the camshaft journal holder bolts to the specified
torque.
Tightening torque: 8 - 12 N.m
(0.8 - 1.2 kg-m, 6.0 - 8.5 Ib-ft)
CAUTION:
The camshaft journal holder bolts are made of special
material and much superior in strength compared with
other type of high strength bolts.
Take special care not to use other types of bolts instead of
these special bolts. To identify these bolts, each of them has
a figure "9" on its head.