Suzuki Katana 1100 Service Manual page 41

3-11 ENGINE
• Remove the ten camshaft journal holders by removing the
bolts.
NOTE:
Be sure to loosen camshaft journal holder bolts evenly by
shifting the wrench diagonally.
• Remove the two camshafts, intake and exhaust.
• Pullout the cam chain guide.
• The cylinder head becomes free for removal when its one
6-mm bolt
®
and twelve 10-mm nuts are removed.
09911-74510: Long socket 14 mm
09914-24510: T handle
NOTE:
When loosening the cylinder head nuts, break each nut loosen
a little at a time in a descending order according to the numbers
cast on a cylinder head.
• Remove the right and left oil pipes
(2).
• Remove the cylinder nut @.