Suzuki Katana 1100 Service Manual page 176

7-29 CHASSIS
• Remove the reservoir tank and its hose from the master
cylinder.
• Drain brake fluid from reservoir tank.
• Slide the dust seal boot sideways and remove the push rod
by using the snap ring pliers.
09900-06108: Snap ring pliers
• Remove the spring/primary cup/ piston/ secondary cup out
of the master cylinder.
• Remove the reservoir tank hose connector by removing the
screw.
CAUTION:
The removed O-ring should be replaced with new one.
MASTER CYLINDER II\ISPECTION
Inspect the cylinder bore wall for any scratches or other
damage.
Inspect the piston surface for any scratches or other damage.
Inspect the cup set and each rubber part for wear or damage.