CHASSIS
7-18
•
•
Remove the damper rod bolt by using the special tools.
(I) 09940-34520: ''T' handle
(3)
09940-34530: Attachment "A"
CD
09900-00410: Hexagon wrench set
Remove the damper rod and rebound spring out of the inner
tube.
•
III
• Separate the inner tube out of the outer tube.
CAUTION:
The outer tube and inner tube "ANTI-FRICTION" metals
must be replaced along with the oil seal and dust seal.
(1)
Oil seal
(3)
Oil seal retainer
(:J)
Anti-friction metal (outer)
Anti-friction metal (Inner)
• Remove the inner and outer anti-friction metals.
INSPECTION
FORK SPRING
Measure the fork spring free length. If it is shorter than the
service limit. replace it with a new one.
Service Limit: 342 mm (13.5 in)