Suzuki Katana 1100 Service Manual page 36

ENGINE 3-6
• Remove the oil cooler by removing the mounting bolts.
• Remove the gearshift lever by removing the mounting bolt.
~­
~l
• Remove the engine sprocket cover by removing the bolts.
CAUTION:
Do not operate the clutch lever to prevent clutch piston
retainer damage.
• Flatten the engine sprocket nut lock washer by using chisel.
• Remove the engine sprocket nut while depressing the brake
pedal.
. .
• Loosen the axle shaft pinch bolts, right and left, and pullout
the cotter pin and loosen the axle nut.
• Loosen the drive chain adjusting lock nuts, right and left, and
push the rear wheel forward.
• Disengage the drive chain and engine sprocket from the
driveshaft.