Operation
Specifications
Typical Characteristics
Table 1-2
Typical characteristics
Parameter reading error (%)
NOTE
f is the measurement frequency in MHz. The incremental errors calculated from
the equations given in this table are additive when measurements are made above
1MHz. The incremental error is applicable after completion of the OPEN/SHORT
compensation.
Figure 1-5
14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Incremental Error at f
Á
±
×
----- -
≥
1 MHz
Offset Value for D
Chapter 1