AT&T Call Management System Supervizor's Manual page 74

Programming CMS Shift Configurations
5. To copy all your shift configurations from the hard disk onto the floppy
diskette, type
copy c: Shift*. cms a:
6. To copy the system tables onto the floppy diskette, type
copy c:systbls. cms a:
Remove the data backup disk when the light on disk drive A goes out.
7.
8. Write the current date on a label and attach it to the duplicate.
9. To return to the cms directory on disk drive C, type these commands:
c:
c: cd\cms
Restoring Shift Configurations
If you ever lose a shift configuration (for instance, if you clear a configuration
by accident), restore the desired configuration (or all configurations) from the
duplicate as follows:
1. Repeat steps 1 through 4 in the previous procedure.
2. To restore all your shift configurations from the duplicate onto the hard
disk, type:
copy a: shift*.cms
To restore a single shift configuration from the duplicate, type:
copy a:shiftX.cms
(Replace X with the number of the shift configuration.)
3. To restore the system tables from the duplicate copy onto the hard disk,
type:
copy a:systbls.cms c:\cms\cmsmgt
4. Remove the data backup disk when the light on disk drive C goes out.
[< ]
[< ]
Backing Up and Restoring Shift Configurations 3-35
[< ]
[ < ]
c :\cms\cmsmgmt
[< ]
c:\cms\cmsmgt
[< ]
[< ]