AT&T Call Management System Supervizor's Manual page 137

CMS Telephones and Telephone Programming
To program the preferred ringing pattern for a telephone, agents should:
For an analog telephone,
1.
Slide the T/P switch to P.
The telephone rings to signal program mode.
Touch line button.
2.
Press [*] [3] [2] and the ring pattern number (1–8).
3.
The phone rings with a different ring each time a different ring number is
pressed.
When the agent hears the ringing pattern he or she likes, he or she
4.
should slide the T/P switch to the center position.
For an MLX telephone (without display),
Press [Feature] [0] [0].
1.
The phone is in program mode.
Touch line button.
2.
3. Press [*] [3] [2] and the ring pattern number (1-8).
The phone rings with a different ring each time a
pressed.
4. When the agent hears the ringing pattern he
should press [Feature] [*] [0] [0] .
For an MLX telephone (with display),
1. Press [Feaure] [0] [0].
The phone is in program mode.
2. Touch line button.
3. Press [*] [3] [2] and select a pattern (1–8) using the display buttons.
4. Press [Enter] after selecting the pattern you like.
5. To leave programming mode, press [Feautre] [*] [0] [0] .
5-30 Using MERLIN LEGEND Features with CMS
different ring number is
or she likes, he or she