Table of Contents
Advertisement
Troubleshooting
Message 2 is selected,
but not recorded.
Lines are not identically
programmed for CU1 and
CU2.
WARNING--Message Unit Problem. Check Message Length.
Status Indicator:
Possible Cause
The delay message is at
least five seconds longer
than the number of
seconds entered for
"Delay Message Length"
on the Set Options screen.
The lines assigned to CU1
and CU2 do not match
exactly.
Select message 1, or record message 2.
Program lines for CU1 and CU2 identically.
MSG
Listen to and time the delay message for both
day and night. Then do one of the following:
Record a new delay message.
Enter the correct number of seconds for
"Delay Message Length" on the Set
Options screen.
Ask the MERLIN LEGEND manager to check
the line assignments for the two jacks
assigned to CU1 and CU2. Follow instructions
for the "Line Status Test" in Chapter 7 of the
CMS Installation and System Programming
Guide.
If the assignments do not match, repro-
gram the lines so that they do.
If the assignments match, check the
connections to the control unit to be
sure the lines are connected properly.
Corrective Action
Warning Messages 9-9
Advertisement
Table of Contents
