Table of Contents
Advertisement
Troubleshooting
WARNING--Printer Not Ready. Using Prt Sc Key Will Halt CMS.
Status Indicator:
Effect on Call Management:
sage is displayed, CMS will stop managing calls.
Effect on Data Collection:
tion stops, but resumes when the problem is corrected. Data are saved for
the portion of the hour that CMS was managing calls.
Possible Cause
Printer is not in "on-line" or
"ready" status.
The printer is not receiving
power.
The printer has no paper,
or the paper is jammed.
A cable connection
between the printer and
the PC is loose.
NOTE:
If the problem is corrected, you should see the message
Printer Now Ready
If you do not see this, message, try correcting the problem again. If you still
do not see the message, reboot the PC and restart CMS. If the problems
persist, call NTSC/NSAC at the phone number given on the inside front
cover of this guide or contact your AT&T Authorized Dealer.
9-14 Warning Messages
Don'tPrtSc
If you use the [Prt Sc] key when this mes-
If CMS stops managing calls, all data collec-
Put printer in "on-line" or "ready" status.
Make sure the printer is plugged in and turned
on, and the Ready light is on.
1. Make sure paper is loaded and that the
paper isn't jammed.
2. Make sure the paper is aligned properly.
3. Press the Form Feed button on the
printer to make sure the paper feeds
properly.
Make sure the connections are secure at both
ends of the cable running between the printer
and the PC.
Corrective Action
Advertisement
Table of Contents
