Table of Contents
Advertisement
CMS Telephones and Telephone Programming
O
1
Display
The telephone display shows the time and date and provides information that
helps you handle calls and program the telephones in your system.
O
2
Display Buttons
These buttons are used for control of display and time-keeping functions.
O
3
ICOM or SA Buttons
Two line buttons are labeled ICOM (Intercom) or SA (System Access)
depending on how your telephone system is set up. If your telephone has
ICOM buttons, they are used for placing inside calls only. If your telephone
has SA buttons, you can place either inside or outside calls on any SA button.
O
4
Line Buttons
Each line assigned to CMS (up to 28) is associated with a line button which is
assigned to CMS and attendant ports. Your system may also have buttons for
lines not associated with CMS, such as personal lines or lines for outgoing
calls.
The lights next to the line buttons show the status of each line. For more infor-
mation about the lights on the telephone, see page 5-9.
Any button not used for CMS or other phone lines can be programmed for
MERLIN LEGEND system features. System features most commonly used
with CMS are described on pages 5-22 through 5-30. Programming instruc-
tions and codes are given on pages 5-31 through 5-34.
For a complete list of MERLIN LEGEND features, see the MERLIN LEGEND
Communications System System Reference.
NOTE:
A Coverage lnhibit button is necessary if you will be using the Fallback Plan.
CMS Supervisor's Telephone 5-3
Advertisement
Table of Contents
