Ppp Acfc Local; Ppp Acfc Remote - HP MSR series Command Reference Manual

Parameters
acl: Generates PPP accounting statistics for traffic that matches the configured ACL. If no ACL is
configured, the device generates PPP accounting statistics for all traffic.
acl-number: ACL number in the range of 2000 to 3999, where:
2000 to 2999 are numbers for basic IPv4 ACLs.
•
3000 to 3999 are numbers for advanced IPv4 ACLs.
•
name acl-name: Specifies an ACL by its name. The acl-name represents the name of an IPv4 ACL, a
case-sensitive string that starts with an English letter and contains 1 to 63 characters. To avoid confusion,
do not use the English word all as an IPv4 ACL name.
Examples
# Enable PPP traffic statistics collection on interface Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] ppp account-statistics enable

ppp acfc local

Use ppp acfc local to configure the local end to send ACFC requests, that is, configure the local end to
include the ACFC option in its outbound LCP negotiation requests.
Use undo ppp acfc local to restore the default.
Syntax
ppp acfc local request
undo ppp acfc local
Default
The local end does not include the ACFC option in its outbound LCP negotiation requests.
Views
Interface view
Default command level
2: System level
Parameters
request: Specifies that the local end include the ACFC option in its transmitted LCP negotiation requests.
Examples
# Configure port Serial 2/0 to send ACFC requests to its peer in PPP negotiation.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] ppp acfc local request

ppp acfc remote

Use ppp acfc remote to configure how the local end handles the ACFC requests received from the remote
peer.
5