Fwd/Trans To Outside Line - AT&T Syn248 SB35010 Installation And Configuration Manual

Syn248 Installation and Configuration Guide

Fwd/Trans to Outside Line

You can enable or disable the ability of each Deskset to forward or transfer a call to an
outside line. These features use two of your telephone lines. This function is enabled by
default. Disabling this function prohibits the user from sending a call to an outside line
via the Gateway.
To enable or disable Forward/Transfer to an outside line:
1. On the Admin Settings menu, press 2 to display the Forward/Transfer to line
screen.
Fwd/Trans to line
Fwd/Trans to line
Disabling this option will prohibit Call
Forwarding or Call Transfers to an
outside line.
Press
options.
Save
2. Press
3. Press
Device Configuration
Enabled
or to cycle through Quick
Dial
SB35031 Deskset
 
to select Enabled or Disabled.
or
to accept the changes and return to the Admin Settings menu.
Save
If the Intercom Call Forward–No Answer target is set to Phone #, a
warning message will appear if you set Fwd/Trans to Outside Line to
Disabled. The message warns you that Call Forward–No Answer is now
set to OFF. You may want to select a new target for the Intercom Call
Forward–No Answer setting.
91
Back to Contents
SB35025/SB35020 Deskset