Dialing The Destination With A Registered Number And The Keypad (Chain Dial Keys); Registering New Chain Dial Keys - Kyocera KM-3035 Operation Manual

Section 3 Fax Operation (Various Functions)
Dialing the Destination With A Registered Number and the Keypad
(Chain Dial Keys)
If you register a chain dial number under a speed-dial key in advance, that speed-dial key
will function as a chain dial key and the chain dial key can be used to enter the initial
portion of the other party's fax number.
Example:
If the number "212" is registered under a speed-dial key (which then functions as a chain
dial key) and you want to dial the number 212-XX-XXXX, press the key under which "212"
is registered and enter the rest of the number with the numeric keys.
* You can only use chain dial keys once in a dialing sequence: to enter the initial digits of
the other party's fax number.
* You can use chain dial keys when entering destination fax numbers in each of the various types of fax communication available in this fax
such as Broadcast Transmission.
* You CANNOT use chain dial keys in combination with group dial keys.

Registering New Chain Dial Keys

* You can register any number of the 600 speed-dial keys for use as
chain dial keys.
* If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode
settings.
1
Press the "Register" key. The Registration Select screen
will appear.
(inch)
(metric)
3-10
2
Press the "Dial" key. The touch panel will switch to dial
registration.
(inch)
(metric)
3
Press an unregistered speed-dial key on the touch panel.
* If there are no unregistered speed-dial keys displayed,
use the " " and/or " " cursor keys to switch to a screen
that displays an unregistered key.
(inch)
(metric)