Modifying Or Deleting Permit Telephone Numbers - Kyocera KM-1650 Operation Manual

Other Features of this Fax
2 Press the
Parameter.
3
Press the Enter key.
4 Press the
No. [Permit tel nr].
5 Press the Enter key.
6
Use the
number from among #1 – #5.
7 Press the Enter key.
8 Use the keypad to enter the desired Permit Telephone
Number.
Each Permit Telephone Number can be up to 20 digits
in length and can include any combination of the
numerals 0 – 9.
9 Press the Enter key. Registration of that Permit Telephone Number is complete.
> If you want to continue registering other Permit Telephone Numbers, repeat steps 6 – 9.
> If you are finished registering Permit Telephone Numbers, press the Reset key. The operation

Modifying or Deleting Permit Telephone Numbers

Note
If you want to cancel the procedure part way through, press the Reset key. The operation panel will
return to the initial mode settings.
1 Perform steps 1 – 5 of Registering New Permit Telephone Numbers on page 5-49.
2
Use the
Telephone Number to be modified or deleted.
3 Perform the following modification or deletion procedure.
> Modifying registered information
(1) Press the Enter key.
(2) Use the keypad to enter the new Permit Telephone
(3) Press the Enter key.
5-50
key or the
key or the
key or the key to select an unregistered
panel will return to the initial mode settings.
key or the key to select the Permit
Press the Stop/Clear key to clear the currently displayed number from the message display.
Number to be registered.
Each Permit Telephone Number can be up to 20
digits in length and can include any combination of
the numerals 0 – 9.
key to select Program Fax
key to select Permit Tel
Program:
Program encryption box
Program Encryption ID
Program Fax Parameter
Program Fax Parameter:
Own Name
Own ID
Permit Tel No.
Permit Tel No.:
End
#1:
#2:
#1:
Program Permit Tel. No.
Permit Tel No.:
End
#1:2222222
#2:
#1:2222222
Program Permit Tel. No.
:
:0000
20 Digits
20 Digits