Various Settings And Registration; Turning Print Out Of Each Report On/Off ("Print Report" Setting); Activity Report; Restricted Access Report - Kyocera KM-1650 Operation Manual

7

Various Settings and Registration

Turning Print Out of Each Report ON/OFF ("Print Report" setting)

Six different reports can be printed out for checking such points as whether a transmission or
reception was accomplished correctly or not. You can also have each of these reports printed out
automatically or turn OFF automatic print out of each report.
<Activity Report>
Set this report to be printed out upon reaching a predetermined number of communications in order
to check the details of those communications.
<Restricted Access Report>
Set this report to be printed out in order to check the details, listed by department, of all
communications occurring under Restricted Access.
<Transmission Report>
Set this report to be printed out after each transmission to check whether the transmission was
accomplished correctly or not.
Select Output only be Condition and then, it is possible to set this report to be printed out
only under certain condition such as a communication error, a Broadcast Transmission, and a
transmission that uses the timer.
<Reception Report>
Set this report to be printed out after each reception to check whether the reception was
accomploshed correctly or not.
Select Output only be Condition and then, it is possible to set this report to be printed out
only under certain condition such as a communication error, a Polling Reception, an Encryption
Reception and a Subaddress-based Confidential Reception.
<Delayed Communication Report>
Set this report to be printed out after each communication that uses the timer is scheduled to check
the information related to that communication.
<NW-FAX Transmission Report>
When the optional Network scanner is installed on this fax machine, you can have this report
attached to an e-mail message in order to check whether each Network FAX transmission was
accomplished correctly or not.
Select Output only be Condition and then, it is possible to set this report to be printed out
only under certain condition such as a communication error, a Broadcast Transmission, and a
transmission that uses the timer.
7-1